One of the first things that should be on your mind after a flood or a hurricane is the important papers and other documents that are in your home inside dressers, desks, and on tables. Sometimes these are the only copies in existence and if you lose them, you might be facing a little bit of inconvenience or you could possibly be facing some legal trouble. Protecting these documents should be one of the first things that you think about when a storm is about to hit and after it is over, you also need to be concerned about how to restore them should they become damaged.
Purchasing a waterproof and fireproof safe is a very good idea if you have any important documents and since most people do, this should apply to you. Whether it is a marriage certificate, birth certificate, warranty on your newly constructed home or large appliance, or any other paper that could have legal significance, you should do your best to make sure that these documents are in a safe place. A waterproof and fireproof safe will help keep these documents protected during times of tragedy striking your house.
Documents should be taken out of standing water before 2 days is up, since mold will start to grow sometime closely afterward. Mold eats organically based items such as paper and wood, so making sure that these items do not become molded is very important. Dry a flat surface to lay these documents onto and open the windows and doors in the home to allow for ventilation. This will help dry the papers out faster.
Any standing water that still exists in your home should be removed, as well. The humidity needs to be lowered as much as you can and the temperature should be put at near 65 degrees Fahrenheit.
Items that need to be taken to a freeze dry facility for restoration should be packed in freezer wrap. Pack these only as tightly as you need to in order to prevent them from sticking to each other in the box. Books should be packed with other like-sized items and papers should be packed in a separate box with other papers. Put your name, address, phone number, and content list on the box and transport it to the facility of your choosing.
Jim Corkern is a writer and promoter of quality
New Jersey mold damage restoration and other states and cities such as
Connecticut mold remediation companies across the united states.
Friday, September 28, 2007
Repairing Wet Basement Concrete
Water leaking into the basement through concrete walls is something of a nuisance if it does not cause structural damage and if it does, well, then it is a much bigger problem that needs to be dealt with. Whether you use your basement for storage or for an extra bedroom or an entertainment area, having a wet basement tends to create an uncomfortable atmosphere. Musty smells from mold growth will result, especially if there are things in the basement for the mold to feed on, such as paper or furniture. Not only is the smell quite repulsive, but the mold also creates a health risk for anyone living in the house. Mold often gets transferred from room to room by people and pets, so the infestation being mainly in the basement will not stop it from getting to other areas of your house.
So, what can you do to waterproof your basement walls? If there are already cracks in them, particularly in the middle of the wall, then sealing up the cracks is a fairly easy job to do. The only thing that you need to really do is determine what kind of material that you need to fill in the cracks with.
Caulking the crack shut does not work because it does not bond to the concrete and water will eventually cause it to come loose and just fall out. Cement does not work, either, since it is rigid and concrete is always moving, expanding, and shrinking.
Using a low-pressure injection of concrete is one of the best things that you can do to correct this problem. While it used to be expensive and need a heavy amount of equipment to accomplish, you can do it these days with a normal caulking gun.
Expandable polyurethane is one material that you can use to fill in cracks allowing water into the house. While it does not give the concrete any added strength, it does create a waterproof barrier. The polyurethane will bond to the crack whether water is seeping in through it at the time or not.
Go around the exterior of the house and find where water could be seeping inside. This could be around the foundation where water settles into pockets because the soil is not piled high enough around the house. You can fix this by getting soil from another area of your yard, if possible, or purchasing some and packing it in these pockets around the house.
If the problem is ground water, one of the only things that you can do about this is to install a drain system in the yard so the soil does not get oversaturated.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and other states such as
South Carolina mold remediation companies across the united states.
So, what can you do to waterproof your basement walls? If there are already cracks in them, particularly in the middle of the wall, then sealing up the cracks is a fairly easy job to do. The only thing that you need to really do is determine what kind of material that you need to fill in the cracks with.
Caulking the crack shut does not work because it does not bond to the concrete and water will eventually cause it to come loose and just fall out. Cement does not work, either, since it is rigid and concrete is always moving, expanding, and shrinking.
Using a low-pressure injection of concrete is one of the best things that you can do to correct this problem. While it used to be expensive and need a heavy amount of equipment to accomplish, you can do it these days with a normal caulking gun.
Expandable polyurethane is one material that you can use to fill in cracks allowing water into the house. While it does not give the concrete any added strength, it does create a waterproof barrier. The polyurethane will bond to the crack whether water is seeping in through it at the time or not.
Go around the exterior of the house and find where water could be seeping inside. This could be around the foundation where water settles into pockets because the soil is not piled high enough around the house. You can fix this by getting soil from another area of your yard, if possible, or purchasing some and packing it in these pockets around the house.
If the problem is ground water, one of the only things that you can do about this is to install a drain system in the yard so the soil does not get oversaturated.
Jim Corkern is a writer and promoter of quality
flood water damage restoration chicago and other states such as
South Carolina mold remediation companies across the united states.
Repairing Tile Grout Helps Stop Water Damage
When the grout between the tile in our bathrooms becomes cracked, loose, or missing, water is allowed to get underneath the tile and damage the wooden floor underneath it. This damage can eventually become structural and cause the need for replacement of the entire floor or at least a sizeable portion of it. This will not only cost you quite a bit of money, but will also cause the loss of at least a day or two in repairing it. Not many people want to have to tear up the tile on the floor in the bathroom or on the walls of the shower and then tear up the floor, too. Repairing grout is not a difficult job to do and it is something that you can do yourself to keep your floor waterproofed.
There are a few different kinds of grout that you can use to repair the cracked or missing grout in your bathroom. There is unsanded, sanded, epoxy, or acrylic grout and depending on the kind of tile that you will use the grout between, you will need to use one instead of the other. If you have marble tiles, you should not use sanded grout, since this will etch the marble irreparably. Use acrylic or unsanded grout on marble tiles.
Mix the grout according to the manufacturer’s instructions and before you go to replace the grout, the area should be cleaned with a mixture of water and vinegar. Use a grout saw to take out the damaged and loose grout, but be careful not to chip the tile. Dampen the joints with water and use a paper towel to soak up the water. The joints need to be filled up and the surface should be rounded out with a stick. Use a damp sponge to get rid of the excess.
Allow the grout to set firmly in the joints and the directions on the grout package should tell you how long this is going to take. A grout sealant should be applied over the grout after it dries, since this grout is going in an area that is going to be wet.
Clean the tile with a damp rag after the sealant dries and allow it to dry again. After the cloudy haze starts to appear on the tile, use a dry towel to polish this off.
You do not need to hire a professional to do these small home improvement jobs. Most of the time jobs of this size can be done by you and you will save a significant amount of money doing them on your own.
Jim Corkern is a writer and promoter of quality
North Carolina Sewage Damage Cleanup and other states such as
South Carolina mold remediation companies across the united states.
There are a few different kinds of grout that you can use to repair the cracked or missing grout in your bathroom. There is unsanded, sanded, epoxy, or acrylic grout and depending on the kind of tile that you will use the grout between, you will need to use one instead of the other. If you have marble tiles, you should not use sanded grout, since this will etch the marble irreparably. Use acrylic or unsanded grout on marble tiles.
Mix the grout according to the manufacturer’s instructions and before you go to replace the grout, the area should be cleaned with a mixture of water and vinegar. Use a grout saw to take out the damaged and loose grout, but be careful not to chip the tile. Dampen the joints with water and use a paper towel to soak up the water. The joints need to be filled up and the surface should be rounded out with a stick. Use a damp sponge to get rid of the excess.
Allow the grout to set firmly in the joints and the directions on the grout package should tell you how long this is going to take. A grout sealant should be applied over the grout after it dries, since this grout is going in an area that is going to be wet.
Clean the tile with a damp rag after the sealant dries and allow it to dry again. After the cloudy haze starts to appear on the tile, use a dry towel to polish this off.
You do not need to hire a professional to do these small home improvement jobs. Most of the time jobs of this size can be done by you and you will save a significant amount of money doing them on your own.
Jim Corkern is a writer and promoter of quality
North Carolina Sewage Damage Cleanup and other states such as
South Carolina mold remediation companies across the united states.
Tuesday, September 11, 2007
Some Interesting Facts You Need to Know About Mold
There are a few things that the average person should know about mold and one of the most obvious ones is that mold growing in the house is dangerous to the health. But, what exactly is mold? Why is it dangerous? How do you get rid of it?
Mold is a fungus and it exists all around us. There are thousands of different species of it and they exist all around the world in more colors than you can think of. Some people seem to think that the words “mold” and “fungus” can be used as replacements for each other, but this is not always the case. All molds are fungi, but not every fungus is a mold. We have been known to eat different fungi around the world such as mushrooms and some kinds of mold have even been used to create such foods as cheese or alcoholic beverages and the fact is that some molds, when used in the creation of food or medicines properly, can be quite beneficial to our health.
The news has been making a big deal over mold the past few years, noting “toxic black mold” in many of its broadcasts. The black mold that it is usually referring to is called Stachybotrys and this is a genus of mold that contains about 10 different species. It grows mostly on dead plants and has been known to grow in homes or businesses. Not every kind of black mold mentioned on the news is Stachybotrys.
People are becoming more and more concerned about hidden mold in their homes and businesses. This is mold that you cannot readily see just by taking a look around your house and is often found tucked away inside air conditioning vents or inside walls. Any mold that has been found to be growing inside the ventilation system should be gotten rid of as soon as possible because every time the air conditioner is turned on, the mold is spread to every corner of your home or business and will be creating health problems for everyone in it.
Mycotoxins are what make some molds so dangerous. These are produced by some molds is what makes the molds dangerous, it is not just the existence of the mold by itself. If a mold does not produce mycotoxins, it is not a significant danger to human health, only the structural health of some buildings that it grows in.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
Mold is a fungus and it exists all around us. There are thousands of different species of it and they exist all around the world in more colors than you can think of. Some people seem to think that the words “mold” and “fungus” can be used as replacements for each other, but this is not always the case. All molds are fungi, but not every fungus is a mold. We have been known to eat different fungi around the world such as mushrooms and some kinds of mold have even been used to create such foods as cheese or alcoholic beverages and the fact is that some molds, when used in the creation of food or medicines properly, can be quite beneficial to our health.
The news has been making a big deal over mold the past few years, noting “toxic black mold” in many of its broadcasts. The black mold that it is usually referring to is called Stachybotrys and this is a genus of mold that contains about 10 different species. It grows mostly on dead plants and has been known to grow in homes or businesses. Not every kind of black mold mentioned on the news is Stachybotrys.
People are becoming more and more concerned about hidden mold in their homes and businesses. This is mold that you cannot readily see just by taking a look around your house and is often found tucked away inside air conditioning vents or inside walls. Any mold that has been found to be growing inside the ventilation system should be gotten rid of as soon as possible because every time the air conditioner is turned on, the mold is spread to every corner of your home or business and will be creating health problems for everyone in it.
Mycotoxins are what make some molds so dangerous. These are produced by some molds is what makes the molds dangerous, it is not just the existence of the mold by itself. If a mold does not produce mycotoxins, it is not a significant danger to human health, only the structural health of some buildings that it grows in.
Jim Corkern is a writer and promoter of quality
Houston Fire Damage Water Restoration Contractor companies and
Los Angeles Water Damage and Restoration Services.
How To Repair Water Damaged Electronics
A lot of people have had their electronic devices come into contact with liquid, whether it’s a glass of milk or a bathtub full of water, but most people do not know what they are supposed to do with these items afterward. Can they be fixed? Is there really anything wrong with them?
Well, depending on how long they were in the water and whether they were on at the time, they can probably be fixed. It also depends on what kind of liquid you drop the device into. A lot of electronic devices switch of automatically as soon as they come into contact with a liquid and this is important, because it is not the liquid itself that causes the damage to the device. It is the electric current running through it when the water hits it. Even if you put a device that is not on in a puddle of clean water and let it stay in it overnight, it is not likely to be irreparably damaged as long as the power was off. You can most likely pull the item out of the water, allow it to dry completely, and it should power back on fine. I would not advise trying this as an experiment, though, because not every electronic device is made of the same material. As long as you do not attempt to power on the device while it is still wet, it should be alright. Allow the device to dry in a dry, cool area, but not so cool that it will let the device pick up any condensation.
Anything that has been submerged in dirty water, such as flood water, will probably require a bit more attention than that. Flood waters have been known to contain just about any kind of pollution that you can imagine. Silt, mud, sewage, and other chemicals could be getting inside your electronic device and it will take a lot more than simply drying the device out to get it to work properly again.
Even computer hard drives have been known to be restored with the proper cleaning procedures after having been flooded. The particle debris that has made its way inside the hard drive has to be cleaned out first and quite thoroughly before the drive will work again. Simply plugging the hard drive back into the computer after it is dry will NOT work and will damage the drive irreparably.
Unless you know a lot about electronics, your best bet is to take whatever water damaged device you have on your hands to a specialist. Depending on what the value of the device is or if it is a hard drive, the importance of the information stored on it, you might want to fork over the cash necessary to have it repaired.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Well, depending on how long they were in the water and whether they were on at the time, they can probably be fixed. It also depends on what kind of liquid you drop the device into. A lot of electronic devices switch of automatically as soon as they come into contact with a liquid and this is important, because it is not the liquid itself that causes the damage to the device. It is the electric current running through it when the water hits it. Even if you put a device that is not on in a puddle of clean water and let it stay in it overnight, it is not likely to be irreparably damaged as long as the power was off. You can most likely pull the item out of the water, allow it to dry completely, and it should power back on fine. I would not advise trying this as an experiment, though, because not every electronic device is made of the same material. As long as you do not attempt to power on the device while it is still wet, it should be alright. Allow the device to dry in a dry, cool area, but not so cool that it will let the device pick up any condensation.
Anything that has been submerged in dirty water, such as flood water, will probably require a bit more attention than that. Flood waters have been known to contain just about any kind of pollution that you can imagine. Silt, mud, sewage, and other chemicals could be getting inside your electronic device and it will take a lot more than simply drying the device out to get it to work properly again.
Even computer hard drives have been known to be restored with the proper cleaning procedures after having been flooded. The particle debris that has made its way inside the hard drive has to be cleaned out first and quite thoroughly before the drive will work again. Simply plugging the hard drive back into the computer after it is dry will NOT work and will damage the drive irreparably.
Unless you know a lot about electronics, your best bet is to take whatever water damaged device you have on your hands to a specialist. Depending on what the value of the device is or if it is a hard drive, the importance of the information stored on it, you might want to fork over the cash necessary to have it repaired.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
How To Repair Water Damaged Electronics
A lot of people have had their electronic devices come into contact with liquid, whether it’s a glass of milk or a bathtub full of water, but most people do not know what they are supposed to do with these items afterward. Can they be fixed? Is there really anything wrong with them?
Well, depending on how long they were in the water and whether they were on at the time, they can probably be fixed. It also depends on what kind of liquid you drop the device into. A lot of electronic devices switch of automatically as soon as they come into contact with a liquid and this is important, because it is not the liquid itself that causes the damage to the device. It is the electric current running through it when the water hits it. Even if you put a device that is not on in a puddle of clean water and let it stay in it overnight, it is not likely to be irreparably damaged as long as the power was off. You can most likely pull the item out of the water, allow it to dry completely, and it should power back on fine. I would not advise trying this as an experiment, though, because not every electronic device is made of the same material. As long as you do not attempt to power on the device while it is still wet, it should be alright. Allow the device to dry in a dry, cool area, but not so cool that it will let the device pick up any condensation.
Anything that has been submerged in dirty water, such as flood water, will probably require a bit more attention than that. Flood waters have been known to contain just about any kind of pollution that you can imagine. Silt, mud, sewage, and other chemicals could be getting inside your electronic device and it will take a lot more than simply drying the device out to get it to work properly again.
Even computer hard drives have been known to be restored with the proper cleaning procedures after having been flooded. The particle debris that has made its way inside the hard drive has to be cleaned out first and quite thoroughly before the drive will work again. Simply plugging the hard drive back into the computer after it is dry will NOT work and will damage the drive irreparably.
Unless you know a lot about electronics, your best bet is to take whatever water damaged device you have on your hands to a specialist. Depending on what the value of the device is or if it is a hard drive, the importance of the information stored on it, you might want to fork over the cash necessary to have it repaired.
Well, depending on how long they were in the water and whether they were on at the time, they can probably be fixed. It also depends on what kind of liquid you drop the device into. A lot of electronic devices switch of automatically as soon as they come into contact with a liquid and this is important, because it is not the liquid itself that causes the damage to the device. It is the electric current running through it when the water hits it. Even if you put a device that is not on in a puddle of clean water and let it stay in it overnight, it is not likely to be irreparably damaged as long as the power was off. You can most likely pull the item out of the water, allow it to dry completely, and it should power back on fine. I would not advise trying this as an experiment, though, because not every electronic device is made of the same material. As long as you do not attempt to power on the device while it is still wet, it should be alright. Allow the device to dry in a dry, cool area, but not so cool that it will let the device pick up any condensation.
Anything that has been submerged in dirty water, such as flood water, will probably require a bit more attention than that. Flood waters have been known to contain just about any kind of pollution that you can imagine. Silt, mud, sewage, and other chemicals could be getting inside your electronic device and it will take a lot more than simply drying the device out to get it to work properly again.
Even computer hard drives have been known to be restored with the proper cleaning procedures after having been flooded. The particle debris that has made its way inside the hard drive has to be cleaned out first and quite thoroughly before the drive will work again. Simply plugging the hard drive back into the computer after it is dry will NOT work and will damage the drive irreparably.
Unless you know a lot about electronics, your best bet is to take whatever water damaged device you have on your hands to a specialist. Depending on what the value of the device is or if it is a hard drive, the importance of the information stored on it, you might want to fork over the cash necessary to have it repaired.
Little known Phone Sticker Squeals On Water Damage And Voids Warranty
If you take a look inside the case of your cell phone, you should see a round white sticker placed somewhere on the device. What is it? This is called a water damage sticker and if your phone is exposed to moisture that makes its way inside the phone, this can be used to completely void your warranty, no matter the reason your phone may stop working. It does not seem to take much, either; a simple drop of water placed onto this sticker is enough to change its color and void the warranty on your cell phone. For honest consumers who accidentally get a small bit of water on their phone and then 5 or 6 months later, suddenly notice that the phone is having problems, knowing about this sticker is quite useful.
What exactly can you do to stop this little devil from voiding the warranty on your phone should is accidentally get a little damp? The best thing that you can do is to take a piece of satin finished scotch tape and put it over the sticker to keep the color from changing if it gets wet. If you drop your phone into the toilet or the bathtub, this probably isn’t going to be that effective, but if you are just worried about general moisture problems or an accidental quick spill of something on the phone, this should work just fine. If your phone stops working for some other reason, remove the tape and take it back to the manufacturer for repairs or a replacement.
It is was not exactly a bad idea for these stickers to be put on the inside of phones, though; a lot of phones get returned that are supposedly not water damaged, but are. At the same time, though, it is bad for the consumer because having such a sticker can completely void the warranty regardless of whether the liquid was the reason the phone stopped working or not. The phone could have just been a defective model and it would make no difference.
Hopefully people will use the information presented here honestly and not try to defraud the phone company into giving them a new item after their phone was irreparably damaged by having a hot cup of coffee spilled onto it or something like that. For honest consumers just having a bit of bad luck, it is great to know these kinds of things about our electronics just in case. Unfortunately, there are those that will attempt to misuse this information.
Jim Corkern is a writer and promoter of quality
Miami water damage restoration companies and
mold remediation companies across the united states.
What exactly can you do to stop this little devil from voiding the warranty on your phone should is accidentally get a little damp? The best thing that you can do is to take a piece of satin finished scotch tape and put it over the sticker to keep the color from changing if it gets wet. If you drop your phone into the toilet or the bathtub, this probably isn’t going to be that effective, but if you are just worried about general moisture problems or an accidental quick spill of something on the phone, this should work just fine. If your phone stops working for some other reason, remove the tape and take it back to the manufacturer for repairs or a replacement.
It is was not exactly a bad idea for these stickers to be put on the inside of phones, though; a lot of phones get returned that are supposedly not water damaged, but are. At the same time, though, it is bad for the consumer because having such a sticker can completely void the warranty regardless of whether the liquid was the reason the phone stopped working or not. The phone could have just been a defective model and it would make no difference.
Hopefully people will use the information presented here honestly and not try to defraud the phone company into giving them a new item after their phone was irreparably damaged by having a hot cup of coffee spilled onto it or something like that. For honest consumers just having a bit of bad luck, it is great to know these kinds of things about our electronics just in case. Unfortunately, there are those that will attempt to misuse this information.
Jim Corkern is a writer and promoter of quality
Miami water damage restoration companies and
mold remediation companies across the united states.
Moldy Rice Is A Favorite In Asia
A food called red yeast rice in English has been a favorite dish in Asian countries for a long time and is a traditional part of Peking duck. Traditional Chinese medicine has used the dish for over 1,000 years in order to help the body keep up a good circulatory system and heart. In China, its use has been noted as far back as the Tang Dynasty of China back in 800 A.D. There might be a good reason for this use, since recent research has shown that red yeast rice is quite good at assisting in lowering a person’s cholesterol. Just what is red yeast rice?
Red yeast rice is made by fermenting a mold called monascus purpureus on top of rice. There is a unique process that is used to separate the naturally occurring ingredient called mevinolin and this somewhat similar to other drugs that doctors give their patients to fight high cholesterol like Lipitor and Zocor. While everyone needs cholesterol in order to have a healthy life, having too much of it as most people know can lead to problems. Our livers produce about eighty percent of the cholesterol that the body needs and the other twenty percent comes from the food that we eat. What the red yeast rice does when you eat it is block the enzyme that exists in the liver to induce the production of cholesterol. Unsaturated fatty acids in the red yeast rice could also possibly add to the beneficial attributes of it.
The possibility of its medical uses has only recently been noticed in western countries, even though it has been used in Asia for centuries. An extract of one of its natural ingredients, mevinolin, is often sold over the counter as a dietary supplement of sorts to be used for controlling cholesterol. You do not need a prescription for this supplement and some people are taking advantage of this.
It is not recommended to eat red yeast rice or take the dietary supplement of mevinolin if you have already been prescribed a drug for high cholesterol such as Lipitor or Zocor.
What about the mold that is used to make the dish? Monascus purpureus is a purplish-red mold in the family Monascaceae and it is used mainly in Asian dishes for color, however it can also impart a pleasant flavor to the food, as well.
Jim Corkern is a writer and promoter of quality
Orlando water damage restoration companies and
Water Damage Restoration companies across the united states.
Red yeast rice is made by fermenting a mold called monascus purpureus on top of rice. There is a unique process that is used to separate the naturally occurring ingredient called mevinolin and this somewhat similar to other drugs that doctors give their patients to fight high cholesterol like Lipitor and Zocor. While everyone needs cholesterol in order to have a healthy life, having too much of it as most people know can lead to problems. Our livers produce about eighty percent of the cholesterol that the body needs and the other twenty percent comes from the food that we eat. What the red yeast rice does when you eat it is block the enzyme that exists in the liver to induce the production of cholesterol. Unsaturated fatty acids in the red yeast rice could also possibly add to the beneficial attributes of it.
The possibility of its medical uses has only recently been noticed in western countries, even though it has been used in Asia for centuries. An extract of one of its natural ingredients, mevinolin, is often sold over the counter as a dietary supplement of sorts to be used for controlling cholesterol. You do not need a prescription for this supplement and some people are taking advantage of this.
It is not recommended to eat red yeast rice or take the dietary supplement of mevinolin if you have already been prescribed a drug for high cholesterol such as Lipitor or Zocor.
What about the mold that is used to make the dish? Monascus purpureus is a purplish-red mold in the family Monascaceae and it is used mainly in Asian dishes for color, however it can also impart a pleasant flavor to the food, as well.
Jim Corkern is a writer and promoter of quality
Orlando water damage restoration companies and
Water Damage Restoration companies across the united states.
Sake Is Not Possible Without Mold
In Japan, koji has been used to make sake for hundreds of years and what might be the surprising thing is that it is actually a kind of mold. The scientific name for the mold is Aspergillus Oryzae and it creates a few different enzymes as it reproduces and these are what cause the starches in the rice to turn into sugars that feed the yeast cells that produce both alcohol and carbon dioxide. Without the addition of the koji, the Japanese alcoholic beverage of sake cannot exist. There are other beverages in Asia that have been known to use koji, but the ways they are brewed are very different.
Sake is produced differently than a beverage such as wine, so it might be useful to explain just how different the production methods are. Wine is created from fermented grapes that already have sugar (or glucose) in them and sugar is what yeast has to eat. Even though there are other kinds of sugars in existence, the yeast cannot metabolize them and so when wine is made, the yeast is put into a liquid that already has sugar in it.
Sake is brewed somewhat similar to beer, but it is not malted. It is made from steamed rice that has had its husk removed and the rice is milled in order to remove the outer covering. It is not uncommon for a rice to be washed down to 50 percent or even less of its former weight in order to get to the innermost part of the rice, which does not contain all of the proteins, amino acids, and fats that can give the sake an unwanted flavor or smell.
Aspergillus oryzae has a very powerful affect on the final product and its cultivation is taken very seriously. It is produced in a different room in the brewery that is known as the koji-muro. When it is ready, it is added to more steamed rice. Later on in the batch, it is put into a large tank where the rice, yeast, water, and koji will continue to ferment. One account says that a brewer presented a bottle of sake with an apology, saying that they had rebuilt their koji-muro the year before and that the cedar wood used in the walls was not as ready as they had thought. The cedar could be tasted and smelled in the sake.
Koji is what gives the rice its unique flavors depending upon what kind of rice it is cultivated on, the pH level of the water, the mineral content of it, and many other things are what make koji one of the most important ingredients of sake.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Sake is produced differently than a beverage such as wine, so it might be useful to explain just how different the production methods are. Wine is created from fermented grapes that already have sugar (or glucose) in them and sugar is what yeast has to eat. Even though there are other kinds of sugars in existence, the yeast cannot metabolize them and so when wine is made, the yeast is put into a liquid that already has sugar in it.
Sake is brewed somewhat similar to beer, but it is not malted. It is made from steamed rice that has had its husk removed and the rice is milled in order to remove the outer covering. It is not uncommon for a rice to be washed down to 50 percent or even less of its former weight in order to get to the innermost part of the rice, which does not contain all of the proteins, amino acids, and fats that can give the sake an unwanted flavor or smell.
Aspergillus oryzae has a very powerful affect on the final product and its cultivation is taken very seriously. It is produced in a different room in the brewery that is known as the koji-muro. When it is ready, it is added to more steamed rice. Later on in the batch, it is put into a large tank where the rice, yeast, water, and koji will continue to ferment. One account says that a brewer presented a bottle of sake with an apology, saying that they had rebuilt their koji-muro the year before and that the cedar wood used in the walls was not as ready as they had thought. The cedar could be tasted and smelled in the sake.
Koji is what gives the rice its unique flavors depending upon what kind of rice it is cultivated on, the pH level of the water, the mineral content of it, and many other things are what make koji one of the most important ingredients of sake.
Jim Corkern is a writer and promoter of quality
Texas Residential Water Damage Restoration Contractors and
Water Damage Restoration companies across the united states.
Subscribe to:
Posts (Atom)
